Products

STANLEY

Stanley Hydraulic Breakers

Stanley’s line of Handheld breakers are the largest in the world. Breakers are available for any application. The Stanley Breakers feature a trouble free diaphragm accumulator and can handle system back pressures of up to 250 psi/17 bar. A handy feature on these breakers is a feathering valve to make startup and initial placement of the steel easy.
Download BR45 Factsheet
Download BR67 Factsheet
Download BR87 Factsheet

Stanley Hydraulic Chainsaws

The CS06 Underwater Hydraulic Chain Saw has the highest power to weight ratio of any chain saw on the market. Safety interlocking triggers, bucking spurs and hand guards. Safety has been designed into the CS11 with interlocking triggers, bucking spurs and hand guards on all models.
Download CS06 Factsheet

Hydraulic power doesn’t require a flywheel to smooth power pulses, so there is no chain coasting when you release the trigger. Kickback is also reduced without the without the centrifugal force from the flywheel used on gas driven saws. Pigtail is not included with tool.

Stanley Hydraulic Cut Off Saw

The Stanley CO23 Cut-Off Saw was designed for underwater use but it is also a very useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm) diameter abrasive or wet or dry diamond blades for cutting metals or concrete. Download CO23 Factsheet

Stanley Hydraulic Hand Drill

The Stanley DL07 Drill is a 1/2 inch capacity drill for drilling in wood, metal, or masonry.
Download DL07 Factsheet

Stanley Hydraulic Hammer Drill

The Stanley HD45 Hammer Drill is a rotary, percussion tool for drilling in concrete, masonry, or asphalt using 736 Skil hex bits.
Download HD45 Factsheet

Stanley Hydraulic Sinker Drill

The Stanley SK58 Sinker Drill is a rotary, percussion tool for drilling in rock or concrete using 7/8 or 1 inch hex, up to 3-inch diameter, drill steel. The SK58 can drill a 3-inch hole, 20 feet deep. The SK58 uses air or water to extract chips from the hole.
Download SK58 Factsheet

Stanley Hydraulic Impact Wrenches

The Stanley IW12 Impact Wrench produces up to 1200 foot pounds (1632 Nm) of impact torque. The IW12 is used for nut, bolt and anchor bolt driving and is equally popular for wood boring and drilling.

The Stanley IW16 Impact Wrench produces up to 2500 foot pounds (3400 Nm) of impact torque. The IW16 is used for nut, bolt and anchor bolt driving and other medium to heavy duty applications.

The Stanley IW24 Impact Wrench produces up to 3500 foot pounds (4760 Nm) of impact torque. The IW24 is used for nut and bolt and anchor bolt driving and other heavy duty applications.